Customise your Transit with the all-new Autobeam LED Sequential Mirror Indicator Unit. During the indication process, the built-in bright amber LED lights flow from one side to the other in the desired signalling direction. The darkened glass enhances your exterior visually and gives your vehicle a more modern look.
Simple fitting
A simple Plug & Play design allows a quick installation of the LED indicators in the exterior of your vehicle.
|
- Features
- Installation
- Specification
- Fitment
- What's in the box
- Warranty
- Other Information
- Shipping
- Reviews
- Advanced sequential technology
- Uniform distribution of light
- Long-Lasting/High Quality
- Plug & Play installation
- Direct replacement
- Error Free
- Low power consumption
- High lumen output
-
Remove the blind-spot mirror
Pull the inner edge of the mirror glass towards the outer side of the vehicle.
With fingers behind the glass, gently pull until the mirror detaches. -
Remove the main mirror glass
Push the inner edge fully inwards, place fingers behind the outer edge, and carefully pull until the mirror releases. -
Remove the original indicator lens
Undo the two T10 Torx screws and remove the indicator lens from the mirror housing. -
Remove the bulb holder
Twist and remove the bulb holder from the original indicator and remove the bulb. -
Connect the new Autobeam indicator (bulb-dependent)
-
W5W bulb: Plug the new indicator directly into the original vehicle plug
-
W16W bulb: Use the supplied extension lead between the vehicle plug and the new indicator
-
-
Seal the indicator
Push the rubber bung into the rear of the new indicator lens to prevent water ingress. -
Test before refitting
Test the indicator operation before reinstalling the lens and mirror glass.
Voltage: 12v
Light colour: Amber
Lens type: Smoked | Clear
Ford Transit MK8.0 (2014-2020)
Ford Transit MK8.5 (2020-2025)
2x LED Sequential Indicator Units
3 Years
If purchased outside the UK warranty is limited to 12 Months.
Condensation may occur which is perfectly normal - These units have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
Models may vary, ensure fitment is correct for the vehicle before purchase. Packaging type may vary depending on stock and shipping restrictions.
Autobeam | Autoprint | Auto Finesse
Orders placed before 1pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 1pm
Processed & shipped the next working day.
Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
All other brands
In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.
Stock for all other brands are not monitored therefor may be out of stock.
Features
- Advanced sequential technology
- Uniform distribution of light
- Long-Lasting/High Quality
- Plug & Play installation
- Direct replacement
- Error Free
- Low power consumption
- High lumen output
Installation
-
Remove the blind-spot mirror
Pull the inner edge of the mirror glass towards the outer side of the vehicle.
With fingers behind the glass, gently pull until the mirror detaches. -
Remove the main mirror glass
Push the inner edge fully inwards, place fingers behind the outer edge, and carefully pull until the mirror releases. -
Remove the original indicator lens
Undo the two T10 Torx screws and remove the indicator lens from the mirror housing. -
Remove the bulb holder
Twist and remove the bulb holder from the original indicator and remove the bulb. -
Connect the new Autobeam indicator (bulb-dependent)
-
W5W bulb: Plug the new indicator directly into the original vehicle plug
-
W16W bulb: Use the supplied extension lead between the vehicle plug and the new indicator
-
-
Seal the indicator
Push the rubber bung into the rear of the new indicator lens to prevent water ingress. -
Test before refitting
Test the indicator operation before reinstalling the lens and mirror glass.
Specification
Voltage: 12v
Light colour: Amber
Lens type: Smoked | Clear
Fitment
Ford Transit MK8.0 (2014-2020)
Ford Transit MK8.5 (2020-2025)
What's in the box
2x LED Sequential Indicator Units
Warranty
3 Years
If purchased outside the UK warranty is limited to 12 Months.
Other Information
Condensation may occur which is perfectly normal - These units have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
Models may vary, ensure fitment is correct for the vehicle before purchase. Packaging type may vary depending on stock and shipping restrictions.
Shipping
Autobeam | Autoprint | Auto Finesse
Orders placed before 1pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 1pm
Processed & shipped the next working day.
Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
All other brands
In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.
Stock for all other brands are not monitored therefor may be out of stock.
Reviews
