Universal Fit

LED Ambient Ring | Series 2

£100.00 £120.00 (inc.VAT)

LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring 2 - Autobeam
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2
LED Ambient Ring | Series 2

Universal Fit

LED Ambient Ring | Series 2

£100.00 £120.00 (inc.VAT)

Runs circles around the rest.
Customising the look of your vehicle has never been easier. The new and improved Ambient Ring delivers over 200 New colour styles including Half & Half Mode, Colour Chase, and sets a new standard with Rainbow Mode. 
Superior look.
Autobeam takes it to a whole new level. With over 2x as many LEDs than others, it's twice as bright. The Improved Ambient Ring also incorporates an all-new opaque dispersion material, which radically reduces the look of single LED's within the housing as well as providing an IP69 waterproof rating. 
Change it up, with a tap. 
Just download the LED app onto your smartphone and you'll be able to control the colour, mode and brightness of your stylish new Ambient Rings using Bluetooth. 

No glue, no sealant, no mess. 
Using Built-in 3M® backing adhesive, the rings stick directly to your fog light unit. With this innovative design forget waiting around for sealant to dry, as installation takes seconds. 

88 reviews   |  
Size
  • New all Copper PCB
  • New opaque light dispersion
  • New IP69 ring Waterproofing
  • New IP69 fuse
  • New IP69 connector
  • New IP69 Resin filled controller
  • Colour Chase modes
  • Colour change modes
  • Static Colour modes
  • Overcurrent protection 
  • Low power consumption
  • High lumen output 
  • App-Controlled

Voltage: 12v
App: Magic LED IOS | Android

Diameter:
60mm | Inner size: 50mm - Outer size: 60mm
70mm | Inner size: 60mm - Outer size: 70mm
80mm | Inner size 70mm - Outer size 80mm
90mm | Inner size 80mm - Outer size 90mm

Wiring connections
Red: Battery +
Black: Battery -

App control: Magic LED IOS | Android

Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.

Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry.

Once the surface is clean and dry gently heat the sticky-back and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.

Align the rings in the correct position and apply pressure for a minimum of 30 seconds.

Do not pressure wash for at least 24 hours.

2x Ambient Rings
1x Ambient controller (Including driver and fuse protection)
1x Fixing components         

3 Years

If purchased outside the UK, the warranty is limited to 12 Months.

Autobeam | Autoprint | Auto Finesse

Orders placed before 1pm 
Processed & shipped the same day unless otherwise stated.

Orders placed after 1pm
Processed & shipped the next working day.

Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.

Orders are shipped Monday-Friday only.

All other brands

In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.

Stock for all other brands are not monitored therefor may be out of stock.

Features

  • New all Copper PCB
  • New opaque light dispersion
  • New IP69 ring Waterproofing
  • New IP69 fuse
  • New IP69 connector
  • New IP69 Resin filled controller
  • Colour Chase modes
  • Colour change modes
  • Static Colour modes
  • Overcurrent protection 
  • Low power consumption
  • High lumen output 
  • App-Controlled

Specification

Voltage: 12v
App: Magic LED IOS | Android

Diameter:
60mm | Inner size: 50mm - Outer size: 60mm
70mm | Inner size: 60mm - Outer size: 70mm
80mm | Inner size 70mm - Outer size 80mm
90mm | Inner size 80mm - Outer size 90mm

Installation

Wiring connections
Red: Battery +
Black: Battery -

App control: Magic LED IOS | Android

Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.

Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry.

Once the surface is clean and dry gently heat the sticky-back and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.

Align the rings in the correct position and apply pressure for a minimum of 30 seconds.

Do not pressure wash for at least 24 hours.

What's in the box 

2x Ambient Rings
1x Ambient controller (Including driver and fuse protection)
1x Fixing components         

Warranty 

3 Years

If purchased outside the UK, the warranty is limited to 12 Months.

Shipping

Autobeam | Autoprint | Auto Finesse

Orders placed before 1pm 
Processed & shipped the same day unless otherwise stated.

Orders placed after 1pm
Processed & shipped the next working day.

Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.

Orders are shipped Monday-Friday only.

All other brands

In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.

Stock for all other brands are not monitored therefor may be out of stock.

Reviews