Official high-quality laminated Autobeam sun strip.
5 |
- Information
- Fitment
- Installation
- What's in the box
- Shipping
- Reviews
Easy installation
High quality vinyl
Standard Size: 1350 x 300mm
Large Size: 1900 x 400mm
Standard Size: Suitable for Cars (Trim to size)
Large Size: Suitable for Vans (Trim to size)
Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.
Before applying, clean the surface area with an alcohol-based cleaner and allow to dry.
We recommend using masking tape to mark the area before attempting to fit.
Once the surface is clean and dry gently heat the badge and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.
Align the Sun strip in the correct position and Felt squeegee the banner to the glass working from the centre point outwards, applying reasonable pressure. If you get any air bubbles or creases, lift the vinyl up slightly and try again.
Before proceeding with this step, ensure you’ve squeegee’d the vinyl as much as possible up to the edge of the glass. Use a sharp craft knife to trim the excess vinyl at the edge, being careful not to cut yourself, or any rubber seals on the edge of your windscreen.
Once the sun strip is applied repeat the same steps for the Autobeam logo.
Do not pressure wash or use wipers for at least 24 hours.
1x Sun strip
1x Sunstrip Autobeam Logo Sticker
Autobeam | Autoprint | Auto Finesse
Orders placed before 1pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 1pm
Processed & shipped the next working day.
Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
All other brands
In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.
Stock for all other brands are not monitored therefor may be out of stock.
Information
Easy installation
High quality vinyl
Standard Size: 1350 x 300mm
Large Size: 1900 x 400mm
Fitment
Standard Size: Suitable for Cars (Trim to size)
Large Size: Suitable for Vans (Trim to size)
Installation
Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.
Before applying, clean the surface area with an alcohol-based cleaner and allow to dry.
We recommend using masking tape to mark the area before attempting to fit.
Once the surface is clean and dry gently heat the badge and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.
Align the Sun strip in the correct position and Felt squeegee the banner to the glass working from the centre point outwards, applying reasonable pressure. If you get any air bubbles or creases, lift the vinyl up slightly and try again.
Before proceeding with this step, ensure you’ve squeegee’d the vinyl as much as possible up to the edge of the glass. Use a sharp craft knife to trim the excess vinyl at the edge, being careful not to cut yourself, or any rubber seals on the edge of your windscreen.
Once the sun strip is applied repeat the same steps for the Autobeam logo.
Do not pressure wash or use wipers for at least 24 hours.
What's in the box
1x Sun strip
1x Sunstrip Autobeam Logo Sticker
Shipping
Autobeam | Autoprint | Auto Finesse
Orders placed before 1pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 1pm
Processed & shipped the next working day.
Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
All other brands
In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.
Stock for all other brands are not monitored therefor may be out of stock.
Reviews
