Autoprint official high-quality Transparent Fog Light Covers for use with Ford Fiesta MK7.5. Choose from 11 custom-designed transparent colours.
Perfect fit
The Laser-cut acrylic design and official 3M Adhesive backing allow a quick and easy installation of the cover as it matches the exact measurements of the original fog light cut-out from the vehicle.
|
- Features
- Specification
- Fitment
- Installation
- What's in the box
- Shipping
- Reviews
- Designed by Autoprint
- High-strength 3mm acrylic
- Perfect Fit
- Laser-cut
- Made in the UK
Material: Transparent coloured 3mm acrylic
3M Adhesive backing | Ford Fiesta MK7.5 Zetec
Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.
Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry.
Once the surface is clean and dry gently heat the sticky back tape and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.
Align the Fog Cover in the correct position and apply pressure for a minimum of 30 seconds.
Do not pressure wash for at least 24 hours.
1x Offical 3M adhesive pads
Autobeam | Autoprint | Auto Finesse
Orders placed before 1pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 1pm
Processed & shipped the next working day.
Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
All other brands
In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.
Stock for all other brands are not monitored therefor may be out of stock.
Features
- Designed by Autoprint
- High-strength 3mm acrylic
- Perfect Fit
- Laser-cut
- Made in the UK
Specification
Material: Transparent coloured 3mm acrylic
Fitment
3M Adhesive backing | Ford Fiesta MK7.5 Zetec
Installation
Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.
Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry.
Once the surface is clean and dry gently heat the sticky back tape and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.
Align the Fog Cover in the correct position and apply pressure for a minimum of 30 seconds.
Do not pressure wash for at least 24 hours.
What's in the box
1x Offical 3M adhesive pads
Shipping
Autobeam | Autoprint | Auto Finesse
Orders placed before 1pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 1pm
Processed & shipped the next working day.
Orders placed after 1pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
All other brands
In stock items normally delivered within 1-3 days. Items made to order can be upto several weeks.
Stock for all other brands are not monitored therefor may be out of stock.
Reviews
