{"title":"FORD FOCUS MK4 LED TAIL LIGHT","description":null,"products":[{"product_id":"led-tail-lights-ford-focus-mk4","title":"LED Tail lights | Smoked | Ford Focus MK4","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eThe Ultimate LED Upgrade For Your Focus MK4\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAre you tired of the standard tail lights? Meet the Autobeam LED Tail Lights, a visually stylish, plug-and-play LED replacement that gives your rear units a modern vibe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003e\u003cstrong\u003eUpgrade Your Style AND Vision\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe new LED style is a significant improvement, providing a much brighter light output. By adding LED lights to your Focus, it will look stylish and brighter, resulting in a sharper light output and increasing safety.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eE-Marked \u0026amp; MOT Compliant\u003c\/li\u003e\n\u003cli\u003eSequential LED Indicators\u003c\/li\u003e\n\u003cli\u003eAvailable in Red, Clear or Smoked Lens Options\u003c\/li\u003e\n\u003cli\u003eAutobeam High-Brightness LED Technology\u003c\/li\u003e\n\u003cli\u003eInstant Millisecond Response Time\u003c\/li\u003e\n\u003cli\u003eEnhanced Night-Time Visibility\u003c\/li\u003e\n\u003cli\u003eImproved Road Presence \u0026amp; Safety\u003c\/li\u003e\n\u003cli\u003eFull Installation Instructions Included\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eVoltage: 12V\u003cbr\u003eLED chip: Autobeam Customised\u003cbr\u003eApplication temperature: -40°C~+80°C\u003cbr\u003eLens Material: \u003cspan\u003eHigh-strength ABS\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003eFitment\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus MK4.0 | 2018 - 2021\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.0 ST | 2018 - 2021\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.5 | 2022 - Onwards\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.5 ST | 2022 - Onwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot compatible with estate models.\u003c\/p\u003e\n\u003cp\u003eModels that already have LED tail lights from the factory will need to change the vehicle settings to None-LED, using Forscan or similar.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with both RHD and LHD vehicles; however, for LHD, the Reverse and Fog functions may be swapped compared to the factory settings.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eWhat's in the box\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1x Left + Right Tail light (4-Pieces)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cb\u003eFull Installation Instructions Included\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1. Remove Original Tail Lights\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnscrew the two thumb screws securing each outer light unit.\u003c\/li\u003e\n\u003cli\u003eUnscrew the one thumb screw securing each inner light unit.\u003c\/li\u003e\n\u003cli\u003eCarefully remove the light units.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e⚠️ \u003cb\u003eTip:\u003c\/b\u003e Avoid applying excessive pressure to the small corner of the light — it can crack easily.\u003c\/li\u003e\n\u003cli\u003eIf a light feels stuck, spray a small amount of lubricant onto the locating pin to release it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e2. Remove Interior Trims\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStart with the large tailgate panel.\u003c\/li\u003e\n\u003cli\u003eRemove the hand covers, then unscrew the four T20 screws underneath.\u003c\/li\u003e\n\u003cli\u003eRemove the lower trim — it’s held in place by five pop clips.\u003c\/li\u003e\n\u003cli\u003eRemove the two side trims, each secured with three metal pull clips.\u003c\/li\u003e\n\u003cli\u003ePop out the four seal clips:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePeel back the rubber seal to expose the plastic clips.\u003c\/li\u003e\n\u003cli\u003eUse a small flathead screwdriver to release the tabs.\u003c\/li\u003e\n\u003cli\u003eReinsert the clips into the rubber boot after removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e3. Route the Wiring\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFeed the cables from the inner lights to the outer lights.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eUse lubricant to make feeding easier.\u003c\/li\u003e\n\u003cli\u003e⚠️ Do not pull too hard — this may damage the plugs or cables.\u003c\/li\u003e\n\u003cli\u003eA thin metal rod can be used to guide the cables through the rubber seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eFollow the factory cable paths and secure new wiring alongside them for a tidy, factory-style finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e4. Connect and Test\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlug in the interlink cables on both sides.\u003c\/li\u003e\n\u003cli\u003eStart the engine and test all lighting functions:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIndicators:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf they hyperflash, install the supplied resistors.\u003c\/li\u003e\n\u003cli\u003eIf they flash normally, resistors are not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eIf only the inner tail lights work, update the light settings in the vehicle’s configuration by using a programme like forscan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e5. Secure and Reassemble\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse cable ties to secure all wiring neatly.\u003c\/li\u003e\n\u003cli\u003eIf resistors are installed:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eMount them securely against metal bodywork only (they get very hot).\u003c\/li\u003e\n\u003cli\u003eDo not let them touch plastic or trim materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eReinstall all trims and panels in reverse order of removal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdditional Tips\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eWhen removing lights, apply gentle, even pressure — avoid twisting.\u003c\/li\u003e\n\u003cli\u003elubricate locating pins for easier removal of lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eTake your time feeding cables through — \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003elubricant and patience\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e go a long way.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eOther Information\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eDiscount codes are not applicable on this product.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProfessional installation is recommended. Although these are plug-and-play, an interlinking wire needs to be connected from the inner unit to the outer. This ensures the indicator function flows correctly from one unit to the other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis LED load resistor will get hot, so it is essential to mount this securely to a metal surface and not plastic; anything that is not heat-resistant must not be able to touch the resistor. We will not take any responsibility for incorrect fitting damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eModels that already have LED tail lights from the factory will need to change the vehicle settings to None-LED, using Forscan or similar. Without changing this setting the tail lights will not fully function.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCondensation may occur, which is perfectly normal - These units have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly, condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eModels may vary; ensure fitment is correct for your vehicle before purchase. Not compatible with estate models. Packaging type may vary depending on stock and shipping restrictions.\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 Years, \u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eIf purchased outside\u003c\/span\u003e\u003cspan\u003e the UK, the \u003c\/span\u003e\u003cspan\u003ewarranty is limited to 12 Months.\u003c\/span\u003e\u003c\/p\u003e","brand":"AUTOBEAM","offers":[{"title":"Default Title","offer_id":43371757273260,"sku":"ABPRL1181","price":350.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0630\/files\/FOCUS-MK4-SMOKED-TAIL-LIGHTS_23bbb866-4c02-49f9-9ce9-ab16b6972ba8.jpg?v=1740675527"},{"product_id":"led-tail-lights-clear-ford-focus-mk4","title":"LED Tail lights | Clear | Ford Focus MK4","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eThe Ultimate LED Upgrade For Your Focus MK4\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAre you tired of the standard tail lights? Meet the Autobeam LED Tail Lights, a visually stylish, plug-and-play LED replacement that gives your rear units a modern vibe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003e\u003cstrong\u003eUpgrade Your Style AND Vision\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe new LED style is a significant improvement, providing a much brighter light output. By adding LED lights to your Focus, it will look stylish and brighter, resulting in a sharper light output and increasing safety.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eE-Marked \u0026amp; MOT Compliant\u003c\/li\u003e\n\u003cli\u003eSequential LED Indicators\u003c\/li\u003e\n\u003cli\u003eAvailable in Red, Clear or Smoked Lens Options\u003c\/li\u003e\n\u003cli\u003eAutobeam High-Brightness LED Technology\u003c\/li\u003e\n\u003cli\u003eInstant Millisecond Response Time\u003c\/li\u003e\n\u003cli\u003eEnhanced Night-Time Visibility\u003c\/li\u003e\n\u003cli\u003eImproved Road Presence \u0026amp; Safety\u003c\/li\u003e\n\u003cli\u003eFull Installation Instructions Included\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eVoltage: 12V\u003cbr\u003eLED chip: Autobeam Customised\u003cbr\u003eApplication temperature: -40°C~+80°C\u003cbr\u003eLens Material: \u003cspan\u003eHigh-strength ABS\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003eFitment\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus MK4.0 | 2018 - 2021\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.0 ST | 2018 - 2021\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.5 | 2022 - Onwards\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.5 ST | 2022 - Onwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot compatible with estate models.\u003c\/p\u003e\n\u003cp\u003eModels that already have LED tail lights from the factory will need to change the vehicle settings to None-LED, using Forscan or similar.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with both RHD and LHD vehicles; however, for LHD, the Reverse and Fog functions may be swapped compared to the factory settings.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eWhat's in the box\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1x Left + Right Tail light (4-Pieces)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cb\u003eFull Installation Instructions Included\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1. Remove Original Tail Lights\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnscrew the two thumb screws securing each outer light unit.\u003c\/li\u003e\n\u003cli\u003eUnscrew the one thumb screw securing each inner light unit.\u003c\/li\u003e\n\u003cli\u003eCarefully remove the light units.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e⚠️ \u003cb\u003eTip:\u003c\/b\u003e Avoid applying excessive pressure to the small corner of the light — it can crack easily.\u003c\/li\u003e\n\u003cli\u003eIf a light feels stuck, spray a small amount of lubricant onto the locating pin to release it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e2. Remove Interior Trims\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStart with the large tailgate panel.\u003c\/li\u003e\n\u003cli\u003eRemove the hand covers, then unscrew the four T20 screws underneath.\u003c\/li\u003e\n\u003cli\u003eRemove the lower trim — it’s held in place by five pop clips.\u003c\/li\u003e\n\u003cli\u003eRemove the two side trims, each secured with three metal pull clips.\u003c\/li\u003e\n\u003cli\u003ePop out the four seal clips:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePeel back the rubber seal to expose the plastic clips.\u003c\/li\u003e\n\u003cli\u003eUse a small flathead screwdriver to release the tabs.\u003c\/li\u003e\n\u003cli\u003eReinsert the clips into the rubber boot after removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e3. Route the Wiring\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFeed the cables from the inner lights to the outer lights.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eUse lubricant to make feeding easier.\u003c\/li\u003e\n\u003cli\u003e⚠️ Do not pull too hard — this may damage the plugs or cables.\u003c\/li\u003e\n\u003cli\u003eA thin metal rod can be used to guide the cables through the rubber seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eFollow the factory cable paths and secure new wiring alongside them for a tidy, factory-style finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e4. Connect and Test\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlug in the interlink cables on both sides.\u003c\/li\u003e\n\u003cli\u003eStart the engine and test all lighting functions:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIndicators:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf they hyperflash, install the supplied resistors.\u003c\/li\u003e\n\u003cli\u003eIf they flash normally, resistors are not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eIf only the inner tail lights work, update the light settings in the vehicle’s configuration by using a programme like forscan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e5. Secure and Reassemble\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse cable ties to secure all wiring neatly.\u003c\/li\u003e\n\u003cli\u003eIf resistors are installed:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eMount them securely against metal bodywork only (they get very hot).\u003c\/li\u003e\n\u003cli\u003eDo not let them touch plastic or trim materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eReinstall all trims and panels in reverse order of removal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdditional Tips\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eWhen removing lights, apply gentle, even pressure — avoid twisting.\u003c\/li\u003e\n\u003cli\u003elubricate locating pins for easier removal of lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eTake your time feeding cables through — \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003elubricant and patience\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e go a long way.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eOther Information\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eDiscount codes are not applicable on this product.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProfessional installation is recommended. Although these are plug-and-play, an interlinking wire needs to be connected from the inner unit to the outer. This ensures the indicator function flows correctly from one unit to the other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis LED load resistor will get hot, so it is essential to mount this securely to a metal surface and not plastic; anything that is not heat-resistant must not be able to touch the resistor. We will not take any responsibility for incorrect fitting damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eModels that already have LED tail lights from the factory will need to change the vehicle settings to None-LED, using Forscan or similar. Without changing this setting the tail lights will not fully function.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCondensation may occur, which is perfectly normal - These units have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly, condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eModels may vary; ensure fitment is correct for your vehicle before purchase. Not compatible with estate models. Packaging type may vary depending on stock and shipping restrictions.\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 Years, \u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eIf purchased outside\u003c\/span\u003e\u003cspan\u003e the UK, the \u003c\/span\u003e\u003cspan\u003ewarranty is limited to 12 Months.\u003c\/span\u003e\u003c\/p\u003e","brand":"AUTOBEAM","offers":[{"title":"Default Title","offer_id":43452219687084,"sku":"ABPRL1180","price":350.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0630\/files\/FORD-FOCUS-MK4-LED-TAL-LIGHT_7c18bfce-7172-483c-ae96-84f4a3c5a762.jpg?v=1715640918"},{"product_id":"led-tail-lights-red-ford-focus-mk4","title":"LED Tail lights | Red | Ford Focus MK4","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cstrong\u003eThe Ultimate LED Upgrade For Your Focus MK4\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAre you tired of the standard tail lights? Meet the Autobeam LED Tail Lights, a visually stylish, plug-and-play LED replacement that gives your rear units a modern vibe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cspan\u003e\u003cstrong\u003eUpgrade Your Style AND Vision\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe new LED style is a significant improvement, providing a much brighter light output. By adding LED lights to your Focus, it will look stylish and brighter, resulting in a sharper light output and increasing safety.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eE-Marked \u0026amp; MOT Compliant\u003c\/li\u003e\n\u003cli\u003eSequential LED Indicators\u003c\/li\u003e\n\u003cli\u003eAvailable in Red, Clear or Smoked Lens Options\u003c\/li\u003e\n\u003cli\u003eAutobeam High-Brightness LED Technology\u003c\/li\u003e\n\u003cli\u003eInstant Millisecond Response Time\u003c\/li\u003e\n\u003cli\u003eEnhanced Night-Time Visibility\u003c\/li\u003e\n\u003cli\u003eImproved Road Presence \u0026amp; Safety\u003c\/li\u003e\n\u003cli\u003eFull Installation Instructions Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eVoltage: 12V\u003cbr\u003eLED chip: Autobeam Customised\u003cbr\u003eApplication temperature: -40°C~+80°C\u003cbr\u003eLens Material: \u003cspan\u003eHigh-strength ABS\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003eFitment\u003c\/span\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFord Focus MK4.0 | 2018 - 2021\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.0 ST | 2018 - 2021\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.5 | 2022 - Onwards\u003c\/li\u003e\n\u003cli\u003eFord Focus MK4.5 ST | 2022 - Onwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot compatible with estate models.\u003c\/p\u003e\n\u003cp\u003eModels that already have LED tail lights from the factory will need to change the vehicle settings to None-LED, using Forscan or similar.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with both RHD and LHD vehicles; however, for LHD, the Reverse and Fog functions may be swapped compared to the factory settings.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eWhat's in the box\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e1x Left + Right Tail light (4-Pieces)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cstrong\u003eFull Installation Instructions Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1. Remove Original Tail Lights\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnscrew the two thumb screws securing each outer light unit.\u003c\/li\u003e\n\u003cli\u003eUnscrew the one thumb screw securing each inner light unit.\u003c\/li\u003e\n\u003cli\u003eCarefully remove the light units.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e⚠️ \u003cb\u003eTip:\u003c\/b\u003e Avoid applying excessive pressure to the small corner of the light — it can crack easily.\u003c\/li\u003e\n\u003cli\u003eIf a light feels stuck, spray a small amount of lubricant onto the locating pin to release it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e2. Remove Interior Trims\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStart with the large tailgate panel.\u003c\/li\u003e\n\u003cli\u003eRemove the hand covers, then unscrew the four T20 screws underneath.\u003c\/li\u003e\n\u003cli\u003eRemove the lower trim — it’s held in place by five pop clips.\u003c\/li\u003e\n\u003cli\u003eRemove the two side trims, each secured with three metal pull clips.\u003c\/li\u003e\n\u003cli\u003ePop out the four seal clips:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePeel back the rubber seal to expose the plastic clips.\u003c\/li\u003e\n\u003cli\u003eUse a small flathead screwdriver to release the tabs.\u003c\/li\u003e\n\u003cli\u003eReinsert the clips into the rubber boot after removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e3. Route the Wiring\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFeed the cables from the inner lights to the outer lights.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eUse lubricant to make feeding easier.\u003c\/li\u003e\n\u003cli\u003e⚠️ Do not pull too hard — this may damage the plugs or cables.\u003c\/li\u003e\n\u003cli\u003eA thin metal rod can be used to guide the cables through the rubber seals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eFollow the factory cable paths and secure new wiring alongside them for a tidy, factory-style finish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e4. Connect and Test\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlug in the interlink cables on both sides.\u003c\/li\u003e\n\u003cli\u003eStart the engine and test all lighting functions:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIndicators:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eIf they hyperflash, install the supplied resistors.\u003c\/li\u003e\n\u003cli\u003eIf they flash normally, resistors are not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eIf only the inner tail lights work, update the light settings in the vehicle’s configuration by using a programme like forscan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003e5. Secure and Reassemble\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse cable ties to secure all wiring neatly.\u003c\/li\u003e\n\u003cli\u003eIf resistors are installed:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eMount them securely against metal bodywork only (they get very hot).\u003c\/li\u003e\n\u003cli\u003eDo not let them touch plastic or trim materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eReinstall all trims and panels in reverse order of removal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdditional Tips\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eWhen removing lights, apply gentle, even pressure — avoid twisting.\u003c\/li\u003e\n\u003cli\u003elubricate locating pins for easier removal of lights\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eTake your time feeding cables through — \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003elubricant and patience\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e go a long way.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cspan\u003eOther Information\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eDiscount codes are not applicable on this product.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eProfessional installation is recommended. Although these are plug-and-play, an interlinking wire needs to be connected from the inner unit to the outer. This ensures the indicator function flows correctly from one unit to the other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis LED load resistor will get hot, so it is essential to mount this securely to a metal surface and not plastic; anything that is not heat-resistant must not be able to touch the resistor. We will not take any responsibility for incorrect fitting damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eModels that already have LED tail lights from the factory will need to change the vehicle settings to None-LED, using Forscan or similar. Without changing this setting the tail lights will not fully function.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCondensation may occur, which is perfectly normal - These units have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly, condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eModels may vary; ensure fitment is correct for your vehicle before purchase. Not compatible with estate models. Packaging type may vary depending on stock and shipping restrictions.\u003c\/p\u003e\n\u003cp\u003eWarranty: 2 Years, \u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eIf purchased outside\u003c\/span\u003e\u003cspan\u003e the UK, the \u003c\/span\u003e\u003cspan\u003ewarranty is limited to 12 Months.\u003c\/span\u003e\u003c\/p\u003e","brand":"AUTOBEAM","offers":[{"title":"Default Title","offer_id":53346856370562,"sku":"AB1189","price":350.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0630\/files\/FOCUS-MK4-TAIL-LIGHTS-LED--RED.jpg?v=1728725326"}],"url":"https:\/\/autobeam.co.uk\/collections\/ford-focus-mk4-led-tail-light.oembed","provider":"Autobeam","version":"1.0","type":"link"}